Sikagard®-720 EpoCem®

• As a levelling layer over concrete and mortars in 0.5–3 mm on vertical or horizontal surfaces.
• Application in new works or damaged concrete, in aggressive chemical environments
• Application over high moisture content substrates, even green concrete
• As a Temporary Moisture Barrier (TMB) (min. 2 mm thick) allowing the application of Epoxy, Polyurethane and PMMA* resin coatings requiring dry substrates, for a lasting solution.
• As a pore sealer for the reprofiling, smoothing and levelling of concrete surfaces
• Suitable for moisture control (Principle 2, method 2.3 of EN 1504-9)
• Suitable for restoration work (Principle 3, method 3.1 and 3.3 of EN 1504-9).
• Suitable for physical resistance (Principle 5, method 5.1 of EN 1504-9)
• Suitable for preserving or restoring passivity (Principle 7, method 7.1 and 7.2 of EN 1504-9)
• Suitable for increasing resistivity (Principle 8, method 8.3 of EN 1504-9)

• Improved chemical resistance compared to PCC mortar
• Excellent protection of concrete in aggressive environments
• Impervious to liquids but permeable to water vapour
• Excellent bond to green or hardened concrete whether damp or dry
• Fast overcoating of Sika® resin based finish products
• Ideal preparation for smooth surface finishes
• For internal or external use
• Contains no solvents
• Can be applied by hand or mechanically

Pre-dosed 21 kg sets.