Sika AnchorFix®-1

Fast curing anchorage adhesive

Solvent and styrene free based, two-component polyester anchoring adhesive. Suitable for use in hot and tropical climatic conditions.

  • Fast curing
  • Standard guns can be used
  • Can be used at low temperatures
  • High load capacity
  • ETA Approval available
  • Non-sag, even overhead
  • Styrene-free
  • Low odour
  • Low wastage

Usage

As a fast curing anchoring adhesive for all grades of:
  • Rebars / reinforcing steel
  • Threaded rods
  • Bolts and special fastening systems
  • Concrete
  • Hollow and solid masonry
  • Hard natural stone*
  • Solid rock*
*These substrates may vary greatly, in particular with regard to the strength, composition and porosity. Thereforefor each application the suitability of Sika AnchorFix® -1 adhesive must be tested by applying a sample area. Checking particular bond strength, surface staining and discoloration.  

Advantages

  • Fast curing
  • Standard guns can be used
  • Can be used at low temperatures
  • High load capacity
  • ETA Approval available
  • Non-sag, even overhead
  • Styrene-free
  • Low odour
  • Low wastage

Packaging

300 mL standard cartridge

12 cartridges per box

pallet: 75 boxes

Colour

Component A:

white

Component B:

black

Component A+B mixed:

light grey

Stone colour:

Component A:

white

Component B:

salmon

Component A+B mixed:

beige