Sika AnchorFix®-2+ Tropical

Anchoring adhesive for medium to high loads

Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for use in hot and tropical climatic conditions.

  • Fast curing
  • Standard guns can be used
  • Medium to high load capacity
  • ETA Approval available
  • Suitable for cracked concrete
  • Drinking Water certified
  • LEED Attestation available
  • Non-sag, even overhead
  • Styrene-free
  • Low odour
  • Low wastage

Usage

As a fast curing anchoring adhesive for all grades of:
  • Rebars / reinforcing steel
  • Threaded rods
  • Bolts and special fastening systems
  • Concrete
  • Solid masonry
  • Steel
Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity:
  • Hard natural stone
  • Solid rock
 

Advantages

  • Fast curing
  • Standard guns can be used
  • Medium to high load capacity
  • ETA Approval available
  • Suitable for cracked concrete
  • Drinking Water certified
  • LEED Attestation available
  • Non-sag, even overhead
  • Styrene-free
  • Low odour
  • Low wastage

Packaging

300 mL standard cartridge

12 cartridges per box

Pallet: 75 boxes

Colour

Coponent A

Grey

Component B

Off-white

Coponent A + B mixed

Light grey