Sikadur®-41 SG

3-COMPONENT THIXOTROPIC EPOXY PATCHING MORTAR

Sikadur®-41 SG is a thixotropic, 3-component patching and repair mortar, based on a combination of epoxy resins and special fillers, designed for use at higher temperatures between +25 °C and +45 °C.
Suitable for use in hot and tropical climatic conditions.

Sikadur®-41 SG has the following advantages:
  • Easy to mix and apply
  • Very good adhesion to most construction materials
  • High strength mortar
  • Thixotropic: non-sag in vertical and overhead applications
  • Hardens without shrinkage
  • Different coloured components (for mixing control)
  • No primer needed
  • High initial and ultimate mechanical strength
  • Good abrasion resistance
  • Good chemical resistance

Usage

Sikadur®-41 SG may only be used by experienced professionals.
As a repair and bonding mortar for:
  • Concrete elements
  • Hard natural stone
  • Ceramics, fiber cement
  • Mortar, bricks, masonry
  • Steel, iron, aluminium
  • Wood
  • Polyester, epoxy
  • Glass
As a repair mortar:
  • Filling of cavities and voids
  • Vertical and overhead use
  • Corners and edges
As an abrasion and impact resistant wearing course:
  • Joint filling and crack sealing
  • Joint and crack arris / edge repair
 

Advantages

Sikadur®-41 SG has the following advantages:
  • Easy to mix and apply
  • Very good adhesion to most construction materials
  • High strength mortar
  • Thixotropic: non-sag in vertical and overhead applications
  • Hardens without shrinkage
  • Different coloured components (for mixing control)
  • No primer needed
  • High initial and ultimate mechanical strength
  • Good abrasion resistance
  • Good chemical resistance

Packaging

12 kg (A + B + C)

Colour

Component A: grey
Component B: black
Component C: sand
Components A + B + C mixed: concrete grey