Sikadur®-330

2-component epoxy impregnation resin

Sikadur®-330 is a 2-component, thixotropic epoxy based impregnating resin and adhesive. Suitable for use in hot and tropical climatic conditions.

  • Easy mix and application by trowel and impregnation roller
  • Manufactured for manual saturation methods
  • Excellent application behaviour to vertical and overhead surfaces
  • Good adhesion to many substrates
  • High mechanical properties
  • No separate primer required

Usage

Sikadur®-330 is used as:
  • Impregnation resin for SikaWrap® fabric reinforcement for the dry application method
  • Primer resin for the wet application system
  • Structural adhesive for bonding Sika® CarboDur® plates into slits
 

Advantages

  • Easy mix and application by trowel and impregnation roller
  • Manufactured for manual saturation methods
  • Excellent application behaviour to vertical and overhead surfaces
  • Good adhesion to many substrates
  • High mechanical properties
  • No separate primer required

Packaging

5 kg (A+B)

Pre-batched unit

Not pre-dosed industrial packaging:

Component A

24 kg pails

Component B

6 kg pails

Note: Refer to mixing ratio and mixing clause in this Product Data Sheet.

Colour

Component A: white paste
Component B: grey paste
Components A + B: light grey paste